.0197cl dual row - straight surface moun t board to board plug FPH5-2 series 29 may 09 major league electronics . 0197 cl fine pitch header row specification pins per row FPH5-2 xx d ordering information xxx lf - -- 05 - 30 lead free pin options body height 098 2.50mm .098 plating options gold flash over entire pin f d = dual row f - xx - x - xx - alignment pin leave blank if not needed ap = with packing information tr-p = tape and reel with plastic pick and place pad tb-p = tube with plastic pick and place pad tb-0 = tube without pick and place pad if left blank, packaging at mle's discretion pad may be metal, mylar or plastic v - vertical 128 3.25mm .128 157 4.00mm .157 4235 earnings way, new al bany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com specifications current rating: 0.5 ampere ac/dc voltage rating: 50v ac/dc insulation re sistance: 100m ? min. @ 500v dc dielectric withstanding: 500v ac for one minute contact resistance: 50m ? max. operating temperature: -25c to + 85c max. process temperature: 260c up to 10 secs. materials contact material: brass insulator material: nylon 46 plastic, ul94v-0 plating: gold flash over entire pin products cut to specific sizes are uncancellable/nonreturnable parts are subject to change without notice mates with fps5-2 .177 .157 .138 .118 mated height 'm' socket FPH5-2-xx-d-098 header .197 FPH5-2-xx-d-098 FPH5-2-xx-d-128 FPH5-2-xx-d-128 FPH5-2-xx-d-157 fps5-2-xx-d-087 fps5-2-xx-d-106 fps5-2-xx-d-106 fps5-2-xx-d-126 fps5-2-xx-d-126 socket height 's' header height 'h' (4.50mm) (4.00mm) (3.50mm) (3.00mm) ( 5.00mm ) (3.20mm) (2.70mm) (2.70mm) (2.20mm) ( 3.20mm ) (3.25mm) (3.25mm) (2.50mm) (2.50mm) ( 4.00mm ) .126 .106 .106 .087 .126 .128 .128 .098 .098 .157 table a
.0197cl dual row - straight surface moun t board to board plug FPH5-2 series 29 may 09 revisions revision b - (26th april 2011) tolerances added for 3 decimal places, existing conversion made from mm to inches. added post height (bottom of in sulator to bottom of the post) 0.024 (0.60). 4235 earnings way, new al bany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com products cut to specific sizes are uncancellable/nonreturnable parts are subject to change without notice
|
